More than 50% of water, less than 5%: coconut butter-based NAEI, sulfamic acid, formic acid, methanesulfonic acid, citric acid, oxalic acid, glycol ether, glycol acid, fragrance, organic polymer, polysaccharide, limonene.

Apply the product to the dirty surface and leave for 2-5 minutes. If soils are severe and old or you need a sanitary cleansing, leave for up to 30 minutes, then treat with a brush or sponge and rinse off with water. Repeat the procedure if needed. Test the product in advance on a small hidden spot. The product is ready to use, you don't need to dissolve it with water.

Storage requirements: store in a dry room at the temperature between +5 °С and +25 °С. Do not expose to direct sunlight.

Precaution:

ATTENTION! Contains active acids. Always use rubber gloves to protect your hands. Keep out of reach of children.

For the intended use only! *Apply to acid-resistant surfaces and enamels only (see the guidelines of the plumbing manufacturer). Apply carefully to acrylic surfaces, not longer than 5 minutes. Do not apply to hot or damaged surfaces, acid-sensitive materials: marble and natural stone, aluminium, brass, linoleum, rubber, lacquered and painted floors, etc. Keep in a tightly closed manufacturer's package, away from food, out of reach of children. Localise a spill to avoid the impact. Thoroughly wash your hands after use. Do not smoke, drink, or eat during application. Warning! Do not swallow! If swallowed, rinse the mouth and immediately seek medical aid, show the package of the product if possible. Can cause harm if comes into contact with the skin. If comes into contact with the skin, rinse off with pure water. If comes into contact with eyes, carefully rinse eyes with pure water for several minutes. Remove contact lenses if you wear them and if it is easy to do. Continue rinsing your eyes.