Over 30%: water, caustic soda; less than 5%: starch-based and vegetable oils, anionic hydrotrope based on palm kernel oil, polysaccharide.

HOW TO USE:

**Not intended for copper and rubber pipes, removing blockages in the toilet.

ATTENTION! Contains alkali. Keep out of reach of children!
Always wear rubber gloves to protect your hands.

Without opening the cover, shake the product several times. Open, * pour 250 ml of the product into the drain hole of the sewer pipe. Leave to work for 15 minutes, then rinse abundantly with a powerful stream of hot water.
For severe blockages, pour the product directly into the water and leave to work for a longer time. If needed, use an additional amount of gel and repeat the treatment. While the product is working, do not use the sink or bathroom where the treatment takes place.
To prevent and eliminate unpleasant odours, pour 150-200 ml into the drain hole and leave for 1 hour. Carry out preventive treatment of drain pipes at least once a month.

Precautions:
WARNING! Use only with rubber gloves on and ensure good ventilation of the room. Store in a tightly closed manufacturer's package, away from food, out of reach of children. Avoid the product getting on any surfaces other than those being cleaned! Avoid the product contact with the skin, eyes, hair. Can cause serious damage to the eyes!
Use gloves and eye protection, ensure good ventilation of the room. Thoroughly wash your hands after use. If in eyes, carefully rinse with clean water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If on skin or hair, immediately rinse the contact area repeatedly with plenty of water. If necessary, seek medical help, if possible, show the product packaging. May cause metal corrosion. Do not use together with other cleaning products and products of other manufacturers.

Storage requirements:
Store in a dry room at a temperature from +5 °C to +25 °C.